Message Board
Message 3 of 3
Posted by member Mike Insall on Wednesday 18 March 2015
Thanks again Simon!
The transducer is designed to work "through" the hull, but I was not sure if it would be wise to fix it permanentle, and of course there are a number of products that can do that!
Again I take all your points and will act on them!
Cheers,
Mike
Add your comment
Message 2 of 3
Posted by member Simon Kidd on Wednesday 18 March 2015
Hi Mike.
Usually you'd bond the transducer into the hull with an Epoxy product - but worth checking the transducer is designed for "Through Hull" fitting first - some are not and should be mounted on the outside using a bracket (now and again people skimp of that type of work).. Also - look up online for the user / install manual for your echo sounder - it should give you specific details on installing.
In general cases, as a guide, to bond it in, it's important to ensure that air isn't trapped under the transducer - i.e. no air bubbles in the epoxy - as this will ruin any depth readings. I usually abrade the inside of the hull where the transducer will sit - make sure it's de-greased etc. Then I use some sealant (or similar gungey stuff) to make a ring or "pool" - then fill the ring with correctly mixed epoxy - then once the air bubbles have lifted out of the epoxy - bung the transducer in tight into the hull and hold it in place till the epoxy sets - hey presto - no air bubbles and nice and firm!
Cheers
Simon.
Add your comment | ^Top
Message 1 of 3
Posted by member Mike Insall on Tuesday 17 March 2015
My Hardy 17 that I've just bought has a depth transducer on the inside of the hull.
It has however come away from the hull having been fixed with something like bluetak!
Any advice on the best way to fix it would be much appreciate
Add your comment | ^Top
You must be logged in to post to the Hardy Motor Boat Owners Club message board.
Click here to login in. If you’re not yet a HOC member then why not
join us today?