Message Board
Message 5 of 5
Posted by member Barry pickett on Tuesday 11 May 2021
Hi John
Mine is 1998 so it will probable be the same shafts but as Peter mentioned I can measure them from the inside
which I will do this weekend.
Thank you for your reply
Add your comment
Message 4 of 5
Posted by member Tester on Tuesday 11 May 2021
My 36 Circa 2000 was fitted with 1x3/4" shaft anodes and had Perkins Engines
There is also a copy of the 36 Brochure in the Library Page with some details.
John
Add your comment | ^Top
Message 3 of 5
Posted by member Barry pickett on Tuesday 11 May 2021
Hi Peter
Thank you for your comments I will measure the shaft on the inside at the weekend
Barry
Add your comment | ^Top
Message 2 of 5
Posted by member Peter Cox on Monday 10 May 2021
Barry
I don't know the 36 but generally, the shafts are a uniform diameter both inside and outside the hull, so can you measure the diameter inside the boat? It might well be an imperial measure but equally might not; either way ensure you get the exact anode, for example, the nearest metric measurement to an imperial measurement, even if only half an mm different, won't fit properly. I hope a 36 owner with your engines will be able to help better.
Peter
Add your comment | ^Top
Message 1 of 5
Posted by member Barry pickett on Monday 10 May 2021
Hi
Can anybody tell me the diameter of the prop shafts on a Hardy 36 with Perkins 225 engines I am trying order the shaft anodes prior lifting her over the bank holiday weekend
Add your comment | ^Top
You must be logged in to post to the Hardy Motor Boat Owners Club message board.
Click here to login in. If you’re not yet a HOC member then why not
join us today?
